Build your van in 80/20, without the hard part.
Describe the van you want. Vansy AI designs the frame in aluminum extrusion: the right profile in the right place, every member, connector and panel, checked for fit in the model.
Vansy AI is still being built. Early access opens to the waiting list first, in small groups.
Sample session in Vansy AI. The builder asks: make the galley 150 mm wider and keep both drawers. The agent lengthens four rails and the counter, rebuilds the solids, and checks the slider opening and the drawer travel. It answers that the galley is now 1 350 mm wide, the posts and both drawers are unchanged, and it still clears the sliding door, marked Fits. In the front view the frame widens from 1 200 to 1 350 mm, and in the cut list the top rails, bottom rails and counter change to 1 350 while the posts stay at 860 and the weight is recalculated.
A better way to build. A harder thing to design.
80/20 is the builder's name for T-slot aluminum extrusion: framing that bolts together, where wood is glued and screwed.
Why builders choose it
- It doesn't rot, warp or squeak, and it bolts to the van.
- It comes apart. Change your mind and you move a bolt, not rebuild a cabinet.
- It takes a saw and a hex key, not a woodshop.
It costs more than plywood. Builders who choose it say this list is why.
The hard part
- Which profile goes where, and which connector joins them.
- How long every piece is, once the joints are accounted for.
- Whether it clears the door, the wheel well and the drawer next to it.
All of it before you order metal you can't send back.
Three ways to get a design
| Buy plans | Learn CAD | Vansy AI | |
|---|---|---|---|
| The layout is | Someone else's | Whatever you can draw | The one you describe |
| You need to know | How to follow instructions | CAD, and every 80/20 part | What you want in your van |
| When you change your mind | The plans and the parts list are wrong | Redraw it, recount it | Every member and cut follows |
| Who checks it fits | The author, for their van | You do, by eye | A CAD kernel, on every change |
| Where it stands today | On sale now, for a few layouts | Works now, after weeks of learning | Early. Five kinds of furniture, one van, more every week. |
Vansy AI does the hard part.
The right profile in the right place
Heavy sections where the load is, lighter ones where it isn't, with the connector each joint needs.
Change one thing, everything follows
Widen a cabinet and its members, panels, parts and cuts update together. Nothing to recount.
Checked before you order
Every design is built as real solids and tested: what collides, what won't open, what blocks a door.
Know what it weighs
The weight comes from the parts in the design, so you see it move as the design does.
You talk. It designs, checks and learns.
- 1. Say what you wantIn plain words, or with a sketch or a photo you like.
- 2. It asks what mattersOnly the choices that change the build.
- 3. It designs and checksWhen a check fails, it repairs the design and tries again.
- 4. It learnsWhat passed is remembered for the next design. You can teach it your way too.
Vansy AI designs the furniture and how it fits the van. It does not design insulation, wiring or plumbing. What it produces is a design model, not an engineering sign-off: check fit in your own van and decide for yourself how it is fastened and loaded.
It ships almost every day.
94 changes shipped since October 7.
The first updates are on their way. Join the waiting list to get them by email.
Vansy AI is being built in Seattle by a software engineer who is designing a first van conversion with it.
Read the storyJoin the waiting list.
Vansy AI isn't open yet. Early access goes to the waiting list in small groups, and product updates arrive by email until then.
Only the email is required. The other answers decide who gets invited first and what gets built next.